How to install your greengauges pressure transducer
PLEASE READ THE COMPLETE INSTALLATION INSTRUCTIONS BEFORE BEGINNING THE TASK
- The pressure transducer records up to 140psi or 10 bar. It has a 1/8" x 27 NPT thread, and a single blade connection to the oil pressure gauge.
- The transducer kit comes complete with adapters that will allow fitment to 1/4" x 18, 3/8" x 18 and 1/2" x 14 mounting holes. The sender should not be overtightened on installation, but if problems with sealing are experienced then a little PTFE tape can be used on the threads, making sure that the PTFE does not prevent a good earth connection between the body of the transducer and it's mounting position.
|
